Wilson 801241 MobilePro Dual-Band Signal Booster Kit with 12" Antenna [Discontinued]

This product has been discontinued and is being replaced by the Wilson 460113 MobilePro Dual-Band Signal Booster Kit. You Should Choose This Kit If You need an all in one solution to provide boosted voice calls and 3G data for multiple phones or data devices in a vehicle or other small inside space.  The MobilePro comes with a 12 in. magnetic antenna that sticks to the roof of your vehicle or to the included window mount for use inside and the included AC and DC adapters allow you to use the system in a vehicle, home, office, hotel room, airport, or anywhere else you need coverage. For even more boosting power in your vehicle, our In-Vehicle Kit features a more powerful amplifier to boost weak signals even in fringe coverage areas. Will This Work For Me? The MobilePro signal booster is designed to boost the signal over very small areas, like the inside of vehicle.  With a very strong existing outside signal, the MobilePro will boost the signal up to 6 ft. from the MobilePro amplifier.  If you have a very weak existing outside signal, the phones and data devices will have to stay within 4 to 6 inches from the MobilePro to take advantage of the boosted signal, so you would need to use your phone with a Bluetooth headset.  The MobilePro improves the signals used for both voice calls and Internet access. In areas with a weak signal, the MobilePro will reduce dropped calls, improve call clarity and increase Internet data speeds.  Supported Carriers All carriers that use the standard dual band frequencies (800 MHz & 1900 MHz) for voice and 3G data, including: AT&T 2G/3G/4G HSPA+ (shows as 4G on your phone) Verizon 2G/3G Sprint 2G/3G US Cellular 2G/3G Alltel 2G/3G T-Mobile 2G only in most locations Major Canadian Carriers 2G/3G All other carriers using 800 MHz and 1900 MHz Will not boost 4G LTE for any carrier Included Items 801240 - MobilePro Dual-Band Amplifier 301125 - 12" Magnetic Mount Antenna with SMA-Male Connector 859977 - USB-A to USB-Mini Cable 859963 - DC to DC 5V Power Supply for Sleek and MobilePro 859969 - AC to DC 5V Power Supply for Sleek and MobilePro 901128 - Window Mount with Radial for Magnet Antennas 859946 -  13" Mobile Professional Zippered Carry Pouch Installation Overview Installing the MobilePro signal booster is very easy and because nothing is permanent, it can be moved from one vehicle to another, or brought inside a home or office for use. To install the MobilePro in a vehicle, mount the included antenna on the roof of the vehicle.  Route the attached coax cable in through a door opening.  To protect the cable, run it under the door seal. Connect the cable to the MobilePro Amplifier.  Then just plug in the included 12V power supply and connect it to the MobilePro.  When you place your phone near the amplifier, you should see a stronger signal (it may take up to 30 seconds for your phone's signal strength display to update).  If you already have a strong outside signal, you won't see any benefit from the MobilePro so try it in a place where you typically have signal trouble.  To use the MobilePro in a home, office, airport, or other inside location, start by attaching the suction cup antenna mount to a windows where you receive some existing signal.  Place the antenna on the window mount and connect the cable to the MobilePro Amplifier.  Then just plug in the included AC power supply, or use your computer's USB port and the included USB cable, and connect it to the MobilePro.  When you place your phone near the amplifier, you should see a stronger signal (it may take up to 30 seconds for your phone's signal strength display to update). For more information, check out the following video: