Product Overview
Product Overview
The Wilson Signal Booster 4G Extreme RV Kit is a great solution for people who regularly travel in RVs, Motorhomes, 5th-Wheels, and other large vehicles, and need better voice calls and data while in remote locations. The 4G Extreme RV Kit features the weBoost Drive 4G-X 5-band, 50 dB amplifier, which is one of the most powerful mobile amplifiers allowed by the FCC, a spring mount 4G trucker antenna, and a panel inside antenna to maximize the internal coverage area.
The 4G Extreme Kit boosts the 2G, 3G, and 4G LTE networks for all of the major carriers in North America, giving you fewer dropped calls, increased reception, and the fastest 3G & 4G LTE download speeds possible. Unlike some other mobile signal boosters, the Wilson Signal Booster 4G Extreme communicates with your phone wirelessly, rather than requiring a direct connection or for your phone to sit in a cradle. Additionally, because it broadcasts boosted signal to the local area, multiple phones and data devices can receive boosted signal at the same time.
The inside coverage area that you receive from the Wilson Signal Booster 4G Extreme RV Kit will depend on the existing outside signal strength in the location where you're traveling or parked. In areas where you get a moderate existing outside signal, the 4G Extreme will provide a boosted signal up to 6 ft from the inside antenna. As the outside signal gets weaker, the coverage area will shrink, until the point where you may have to keep your phone within about 18 inches from the inside antenna to take advantage of the boosted signal. The ideal way to talk on the phone while moving around the vehicle would be to keep your phone near the inside antenna and use a bluetooth headset for mobility. Hotspots can also be left near the inside antenna giving you the fastest internet speeds possible.
Supported Carriers
The Wilson Signal Booster 4G Extreme RV Kit supports the Voice, 3G, and 4G LTE networks from all major carriers in North America. It does not support any WiMAX or iDEN networks.
AT&T 2G, 3G, 4G HSPA+ & 4G LTE
Verizon 2G, 3G & 4G LTE
Sprint 2G, 3G
T-Mobile 2G, 3G, 4G HSPA+ & 4G LTE
US Cellular 2G, 3G & 4G LTE
All other carriers using 800 MHz, 1900 MHz, and AWS 1700/2100 MHz
Please Note: This signal booster kit will not work in most European, Asian, and African countries because the frequencies used there are different than those boosted by this equipment.
Included Items
weBoost Drive 4G-X Signal Amplifier
859913 - DC Power Supply
304415 - weBoost 4G RV Spring Mount Antenna with 3-Way Mount and 14 ft Cable
955822 - 20 ft. RG58 Coax Cable with N-Male and SMA Male Connectors
311135 - Wide-Band Panel Antenna with N-Female Connector
Installation Overview
Installing the 4G Extreme kit is very easy and can usually be done in just a few minutes. Since no part of the installation is permanent, the kit can be transferred to another vehicle as needed.
To start, mount the RV Antenna on the exterior of the vehicle using the included 3-way mount, and ensure that the antenna extends above the vehicle for a clear, 360 degree view. Run the attached cable into the vehicle and connect the cable to the amplifier's Outside Antenna port. To the Inside Antenna port, connect the inside antenna cable and run to the inside panel antenna, which you'll mount either on the ceiling or the wall in the location where you'll be using your mobile devices the most. Power on the amplifier and you should immediately start receiving boosted signal.